IE-1162 delay generator

* Overview 6-channel delay generator that can generate 6-channel pulses at arbitrary timings. Settings of this generator can be made from a PC connected via RS-232. OR output is provided, allowing up to 6 burst oscillations.

* Main specifications

Output CH 6 channels + OR output Control modes A, B, C A, B: inverter control mode. Application time 1 µs to 100 s, ∞ Resolution of 50 ns or 6 digits Precision of within 0.1% Pulse width 0 s to 100 s Resolution of 50 ns or 6 digits Precision of within 0.1% Delay width 0 s to 100 s Resolution of 50 ns or 6 digits Precision of within 0.1% Cycle period 200 ns to 100 s Resolution of 50 ns or 6 digits Precision of within 0.1% Jitter 10 ns or less between output signals 50 ns or less between TRIG signals Output signal TTL or open collector Interface RS-232 Control of main unit Remote control from a PC

SG-4115 signal generator

* Overview This is a high-accuracy and high-quality signal generator provided with a 2-channel output employing a DDS method, which is excellent with respect to frequency stability and low distortion. It features various modulation functions such as SWEEP and BURST, as well as basic functions including DUTY and offset. In addition, it features an arbitrary waveform function, enabling waveforms obtained by a digital oscilloscope to be output.

* Main specifications

Number of channels 2 Oscillation waveforms Sine, rectangular, pulse, triangle, ramp, DC, and arbitrary waveforms Oscillation frequencies Sine and rectangular waves: 15 MHz Pulse waves: 3.2 MHz Other waveforms: 100 kHz Output voltage 10 Vp-p SWEEP Linear log All frequency ranges possible BURST Number of bursts 66536 Phase ±359.9° Internal modulation AM, FM, PM, FSK, PSK, PWM Modulation waves: all waveforms except DC External modulation option AM (standard), FM, PM, FSK, PSK, PWM Arbitrary waveform Data length 16,384 Number of waveforms 4 Vertical resolution 12 bit Data transferred from PC Setup memory 9 Remote GP-IB, RS-232

IE-1163 (6-channel)/IE-1164 (2-channel) differential amplifiers

* Overview These amplifiers feature 6-channel/2-channel differential input and output selected channel signals. Input signals are output in a ratio of 10:1 and up to 2 kV signals can be measured by using a 100:1 probe. Output signals are sent to an oscilloscope connected with a coaxial cable. Channels are set by setting the corresponding bit to "ON" with an open collector input on the rear side.

* Main specifications

Model IE-1163 IE-1164 Input block Input 6-channel 2-channel Sensitivity Range 10:1 Accuracy ±2% Frequency response DC to 200 MHz, -3dB Maximum input voltage ±250 V MAX. Output block Output Outputs signals on a selected channel Output sensitivity 10:1 of input (50 Ω) Output potential ±2 V MAX. Output resistance 50 Ω Power Power range 100 V AC to 240 V AC Power consumption 50 VA or less Weight and dimensions Weight About 3 kg Dimensions 298 (W) x 76.3 (H) x 320 (D) mm

High-voltage probe

*	PHV 621 RO high-voltage probe
	Attenuation ratio x 100, 400 MHz, cable length 1.2 m, 2.5 kV
*	PHV 642-L RO high-voltage probe
	Attenuation ratio x 100, 300 MHz, cable length 2.0 m, 4.0 kV
*	PHV 652-L RO High-voltage probe
	Damping ratio x 100, 300 MHz, cable length 2.0 m, 5.0 kV
*	SS-250 Current probe
	DC to 100 MHz, 30 Arms
*	PS-26 Power supply for current probe